Simlock Solutions

Have You got the problem with simlock? Did You change network and Your phone is totally locked and   You cannot use it? Please read carefully all insructions below, maybe You will find something for You that can be used to make phone working in any network You need... But be carefull! We are not taking any responsibility for any kind of damages that You`ve done in Your phone. Solutions are fully tested and 100% working but If You made some mistake it`s only Your fault. We also want to send greatings to people who sent this insructions to us. If You have tested and working solution to any kind of phone You can send it to us we put it here for sure. And we try to recompensate it to You. Just email us!

Check below for the solutions to following phones:
Alcatel, Alcatel OTV, Ericsson A1018s, Ericsson T10s, Ericsson GF768, Maxon, Nokia Vibra, Nokia 3110, Nokia 3210, Nokia 3210 v5.31, Nokia 3210 v5.36, Nokia 6110/5110, Panasonic GD, Siemens C25, Siemens C/M35. Soon more! Just VOTE us: Topsitez.org, German Top100

Please vote for us: | GERMAN TOP |

Alcatel

This method work only with old models of Alcatel: One Touch Easy, One Touch Max, One Touch Viev

You must have simple program to generate special code. This program i available on our CDs or Membership Server. You can olso check on the internet - maybe You`ll find it.

Turn on the phone, type *#06# and read IMEI. Now, run program, and type in window your imei number. Next, click 'Apply' button. Program generate code for deactivate simlock. Enter to phone menu ('Simlock'), and type this code for remove lock. If your phone didn`t have this menu, you must put to phone other operator sim card. Turn on, and when phone ask about this code type it.

Please vote for us: | GERMAN TOP |

Sim lock in Alcatel OTV HD5 i OTP HD8 using RETROFIT v.706

1. On your harddisk make directory - C:\RESU\HD1R2\.
Into this directory you have to upload flash file which you actually want to unlock (OTV HD5 lub OTP HD8).  It should be in directory FLASH.
2. Run program (in EXE directory)
3. Choose your language
4. Connect the cable to phone (it should be turned off !)
5. In "GENERAL" window choose "SWITCH ON" - Phone should turn on.
6. Immedietly choose "CONNECTION" - Phone phone should swich on service mode and on the viewer you can see the belts.
7. Now open FLASH/EEPROM window and next FLASH ACCESS and choose WRITING FROM FILE. It appears the window. In ZONE set second parameter (second part of flash). Press CTRL + ENTER. Flash will be uploaded to phone. After the end press ESC and in GENERAL window choose DISCONNECTION. After flashing IMEI of your phone will be: 3300000.

Please vote for us: | GERMAN TOP |

Ericsson A1018s

1. Run ER2000 Tools (phone is connected to PC) it`s actually turned off.
2. Press FLASH! button.
3. Program replying - POWER ON THE PHONE
4. So turn on phone (press NO button for short time)
5. Than you have to choose flash file (*.r3a - extended)
6. Choose file and...
7. Press ok. and you see some things on viewer.

power on the phone!!! so you: POWER and next remove battery - so you remove it. It could appears once or twice - so you have to do what program need.

8. Now it`s erasing flash...
9. Checkin written data i others things...

now your ericsson tools can stuck. you have to press CTRL+ALT+DEL and reset it and once again do the following 1...9 points but this situations musn`t appears.

10. Starting flashing and some other things and program ends and the phone turn on.

The file you have to choose is: in991105.r3a, but for other languages than all standard - choose another file.

Please vote for us: | GERMAN TOP |

Ericsson T10s

To remove simlock in this phone you must have the cable and the program to read EEPROM from phone ATx Service or Ericsson EEprom loader and Cyber Phreack EEprom Burner.

1. Connect phone with PC.
2. Run read eeprom program
3. Read EEPROM
4. Readed EEPROM save as eeprom.bin.
5. Now open Cyber Phreack EEprom Burner.
6. Choose phone: A1018s or T18s and press BURN!.
7. Now load file eeprom.bin.
8. Program read code NCK and NSCK.
9. In your phone press: left, *, *, right and it appears: ME LOCK, and nest NETWORK, we choose  NETWORK and we typing code.
10. Phone is unlocked.

In phones with new software you have to flash your phone.

Please vote for us: | GERMAN TOP |

Ericsson GH768 and others GH

Ericsson phones are locked with two kinds of simlocks. 1. Network - you can use only one network, 2. NetSubset - you can`t use two selected networks. There are two ways of unlock this little phone. Use Ericsson Service Software:

1. Download eeprom in buffer - to have the security copy
2. Clear SP Lock
3. and thats all

If it appears "TAMPERED" on the viewer - you have to flash the memory.

To check if the phone is locked try: *, <,<,*.

Please vote for us: | GERMAN TOP |

Nokia 3210 Vibra Activation

You must buy a special vibra - motor for this phone and use tips for activate vibra-mode in this phone.

You must have this motor and software - Wintesla and drivers for it.

Open your phone, and install a viba motor. Make folder in your desktop, and copy nsek13.dll and nsek13en.dll to this folder. Rename this file - nsek13.dll into nse8.dll and nsek13en.dll into nse8en.dll. Copy this file and paste to your Wintesla directory. Edit file tesla.ini and include following lines:

[NSE-8]
UserInterface=NSE8
Functionality=NSE8
Products=0503206,0503594,(put other product code)

Save Tesla.ini. Run WinTesla and Connect 3210 to MBUS cable. Open NSE-3 Manually and WinTesla will detect your phone and load it with your modified NSE-8 dlls. Go to "Product Profile" and activate Red Menu , UI Board Menu . Click on "Save" and Exit WinTesla. Now your 3210 has vibra alert!

The above process may erase Personalized phone settings such as Composed Ringertones and logos...

Please vote for us: | GERMAN TOP |

Nokia 3110

Run phone, and read IMEI number (type *#06# in phone) and write it. Now, run program. Type operator code what simlocked this phone. If you don't know this code, call to your operator hotline and ask. Next, type imei number. Press Enter. Program generate code for unlock your phone. Now, type in phone #pw+your_code+1#. Now your phone lost simlock...

Please vote for us: | GERMAN TOP |

Nokia 3210

You must have: cable to connect phone to computer (it's names is 'm2bus'). You must find this cable scheme in internet or buy it. If you have cable you can download software - allnokia.zip

Now, connect cable to pc, turn ON phone, connect cable to phone

Old software can remove only lock 1 and 4 (pseudo-open lock). This method (program) open all 4 lock!

Attention! I don't send software and manual via e-mail. This software open all lock in Nokia 3210 with soft to 5.01 version. Attention! If you use this software with phone, where software is maked in 2000 year, you unlock phone, but destroedy it! Phone is unlocked, but can't connect to network!

Please vote for us: | GERMAN TOP |

Nokia 5110

You must have: cable to connect phone to computer (it's names is 'm2bus'). You must find this cable scheme in internet or buy it. If you have cable you can download software.

Put to phone sim-card with phone is work, type pin. If you logged in network, type code: *#0000#. You see software version in top. If it's low of 5.20 read next. Remove card from phone, connect cable to phone and computer and turn on phone. Run Winlock software. In this software in window 'Option' chose comm port where cable is connect. Close this windows.

Please vote for us: | GERMAN TOP |

Nokia 5110

You must have: cable to connect phone to computer (it's names is 'm2bus'). You must find this cable scheme in internet or buy it. If you have cable you can download software.

Put to phone sim-card with phone is work, type pin. If you logged in network, type code: *#0000#. You see software version in top. If it's low of 5.20 read next. Remove card from phone, connect cable to phone and computer and turn on phone. Run Winlock software. In this software in window 'Option' chose comm port where cable is connect. Close this windows.

Next, click 'Read Phone' button. Ok, next is very important. In windows 'Simlock level 1' in window 'State' you must chose 'Close', in window 'MCC+MNC' you must type '?????' (5x?). In window 'Simlock level 4' in option 'State' you must chose 'Close' and window 'MSIN' type '???????????' (10x?).

Next, click 'Close Simlocs'. Yes! Click 'Close Simlocks', NOT 'Open Simlocks' !!! If you click, you have windows with password - don't change it!. Only click 'Ok' button. It's it! You remove simlock! It's safe? Yes, if you remove lock step by step by this manual. If you change or type other data in Winlock you crash your phone!

If your phone have software version 5.20 or 5.22 you must download other software - 5110520.exe for 5.20 version or 5110522.exe for 5.22 software version. Connect phone and run this software. Click 'Unlock' button. If you see in window 'Work' long time you must restart computer and reconnect phone. If this software end work, run Winlock and unlock phone with this manual (see up).

That's it. At this time is available software to 5.22 version.

Please vote for us: | GERMAN TOP |

Panasonic GD

Step 1:
Connect the GD90 to the cable (COM1)

Step 2:
Press "Cliquer ici et allumer le GD90" and power on the phone...
If it's ok, it will be enter in test mode (green screen)

Step 3:
The Section "Afficher" put on the screen the information like firmware
version, date & hour, imei, lock code, etc...

Step 4:
"Desactiver le code de verouillage" turn off the lock code and reinit to
0000
"Activer l'acces a toutes les langues" activate all language like chinness
simple, chiness traditionnal, etc...

Please vote for us: | GERMAN TOP |

Siemens C25

You need: cable to connect phone to computer, and software. Program from CD ROM drive. This solution is 100% work!

How we can read information about phone software version and simlock? Remove simcard from phone, turn ON phone and type *#06# code. You see imei number. Now, put left menu key. You see software version. First 2 digit's is sw version, ex. 43 is software 4.3, 46 is software 4.6 version, etc. What read information about simlock in phone? Type *#0606#, left menu key. Method for unlocking this phone is work to 4.6 software. At this time unlock phone with 4.7 sw is impossible.

First methods, its use c25v46.exe software for Windows made by Bontek. Connect phone to pc, turn ON phone, chose COM port and put 'Unlock' button. If program done, type in phone *#0003*00000000# and turn OFF phone. It's all. Turn on, phone is unlocked. I'm not tested this software, but this soft work, and not destroy phone. Maybe unlock...

Next method - tested 100% and work. You need cable and 2 programs - flasher c25_4303 and flasher c25_4608. All operation make in DOS mode, not in Windows! Before we start unlocking, please charge battery. Ok. Let's do it! Connect phone to pc, turn ON phone, run swupinst.exe program - this program search COM port where phone is connected. If program find phone, type 'R' in program and turn OFF phone. Next, run c25_4608 program. If program start work, click simple ON in phone (not turn ON phone, only 1 press ON button in 1 sec.!). At this time program erasing phone memory (phone is flashing). If program end flashing and starting transmit data to phone 'Transmitting data to phone...' remove cable form phone, and close program (CTRL+X and Y). Phone still flashing - remove battery and put it back. At this time phone is dead. Don't worry! Connect cable to phone. Run c25_4303 program. Program cannot connect to phone, and write ' Could not contact the mobile ... continue ?'. Type Yes. Now, press ON button. Program must start work. If not, put ON button again, and again,... Program must start work! If program end working, phone is unlocked and work!

If you have phone with new software, and you use old unlocker you destroyed phone. You can see at phone 'Destroyed by C25 Unlocker', 'Wrong soft', or maybe you see nothing. How repair? If you have 'wrong soft' or 'destroyed...' message, run c25_4608 flasher, run all25 program, type imei, press simple ON button, if program start work, fast close this program. If you see at display 'Service mode' run c25_4608 flasher and next c25_4303 flasher. If you not see this message run again c25ll program. Remember close this program before it's end working! If not, phone is crashed. If phone is crashed (you can't turn on phone): use 4608 flasher, and next user trick with all25 program...

Please vote for us: | GERMAN TOP |

Please fell free to send us solutions! We will try to recompensate it to You! Just email us.